2x20 watts stereo amplifier for fixed installations. It's optical for more zone based locations, where high volume isn't necessary. This product is usable for delivering sound in two separate spaces at the same time (in case of monos signal use), or providing stereo sound in one large space.

The device was built with a 3,5 stereo jack input, as well as a UTP output. The volume knob is changeable with a screwdriver. A separate power supply is needed for the function of the amp, which comes with the product for free.

Technical datas:

Input: asymmetric
Input impedance: Min 10 kOhm
Rated input sensitivity: 700 mV
Rated impedance: 8/4 Ohm
Rated output power: 10/20 W
Frequency response:(0, -1 dB): 10Hz-22Khz
Distortion factor: max. 0,1 % (1kHz) max. 0,6 % (28Hz- 30 kHz)
Signal to noise ratio: 97 dB (22Hz-22kHz according for IEC)
Power supply: 12V

Temperature limits: min 10 plusz 45 C
Dimensions and weight: 44 mm, 107 mm, hosszúság 110 mm, 200 gr

Protection datas:
Security classification: A
Protection against electric shock classification: II

Degree of protection: IP 20
Climate resistence number: 10/050/4
Relative humidity of the environment: max: 70%

input connectors: RCA, 3,5mm Jack
output connectors: Euroblock

adaptor incuded



Copyright © 2017 SILVERBLADE, LTD. All Rights Reserved.

No imagery or logos contained within this site may be used without
the express permission of SILVERBLADE, LTD.